Sintered Plate Pulse Dust Collector for Detergent Production Line

• Customization: Available
• Certification: CE, ISO, SGS
• Installation Method: Horizontal
• Operation Type: Fully automatic
• Medium Material: Glassfiber
• Dust Collecting Method: Dry
• Type: Fabric Dust Collector
• Efficiency: 99.9%
• Filter Area: 50-5000m2
• Air Velocity: 0.8-1.2m/Min
• Air Volume: 2160-21600m3/H
• Application: Cement Plant, Steel Plant, Power Plant....
• Transport Package: Steel Frame
• Specification: large
• Trademark: JY
• Origin: China
• HS Code: 8421392990
• Production Capacity: 12 Sets/Mon

Product Description

Sinter-plate Plastic burning board ultra-low emission dust collector

Sinter-plate dust collector uses a unique wave type sinter-plate filter element to replace the traditional cloth bag. Because the sinter-plate is a rigid structure, will not deform, and has no framework wear, it has a long service life. Under some working conditions, its service life is more than 10 times that of the cloth bag.
Due to the deep treatment of the surface of the sinter-plate, the pore diameter is small and uniform, with hydrophobicity, and it is not easy to adhere the dust with high water content, so the sinter-plate dust collector is the best choice when dealing with the dust with high water content and fibrous dust. In addition, as the high-precision manufacturing process of the sinter-plate maintains a uniform micron aperture, it can also handle ultra-fine dust and high concentration dust.
The inlet concentration of the bag filter is generally less than 20 g / m3, while the inlet concentration of the sinter-plate dust collector can reach 500 g / m3. The utility model can simplify the two-stage dust collection into the first stage dust collection, which is not only convenient in process, but also can reduce the cost and energy consumption and reduce the floor area and space pipeline.
Features:

1. High dust removal efficiency In general, the dust concentration of the exhaust can be controlled below 5mg/m3. In the high-concentration dust removal system, the dust removal efficiency reaches 99.999%
2. Long service life The products of our company adopt different formulations and different raw materials, which are suitable for different working conditions, such as acid resistant type, strong alkali resistant type and anti-static type, with long service life.Baosteel has not been replaced since it was 13 years old.
3. Good ash removal effect, stable pressure, stable equipment resistance due to the surface of the sinter-plate after deep treatment, small and even empty diameter, very smooth, so that the dust is extremely difficult to penetrate and stay, can maintain a good ash removal effect.Second, equipment resistance is very stable, pressure loss and running time almost constant.Resistance table (lime dust removal)
4. Plastic-fired plate with strong moisture resistance adopts special formula and is hydrophobic.From the actual use situation, even in winter serious condensation, the entrance of water-bearing dust in saturated water can be used normally.
5. The space occupied by the small Sinter-plate dust collector is only 1/3 to 1/6 of the bag dust collector, and the space can be reduced by overlapping design.
6.  Installation and maintenance is convenient to install and replace the sinter-plate. It is convenient to open the maintenance door of the dust remover and tighten the two bolts fixing the sinter-plate to complete the assembly of a filter plate in daily production, almost without maintenance.